Health and Safety - Fire Safety and Hazards

Electrical fire Hazards

Overloading the limit on a socket.
The Socket on for example your laptop lead must be PAT tested if it's over 1 year old.

info on PAT testing-

"""""""Portable appliance testing (PAT) is the term used to describe the examination of electrical appliances and equipment to ensure they are safe to use. Most electrical safety defects can be found by visual examination but some types of defect can only be found by testing. However, it is essential to understand that visual examination is an essential part of the process because some types of electrical safety defect can't be detected by testing alone.""""""

General fire safety hazards

"""""""Fires need three things to start – a source of ignition (heat), a source of fuel (something that burns) and oxygen:
sources of ignition include heaters, lighting, naked flames, electrical equipment, smokers’ materials (cigarettes, matches etc), and anything else that can get very hot or cause sparks
sources of fuel include wood, paper, plastic, rubber or foam, loose packaging materials, waste rubbish and furniture
sources of oxygen include the air around us""""""""""

What has to be done to prevent fire hazards 

Employers (and/or building owners or occupiers) must carry out a fire safety risk assessment and keep it up to date. This shares the same approach as health and safety risk assessments and can be carried out either as part of an overall risk assessment or as a separate exercise.

Based on the findings of the assessment, employers need to ensure that adequate and appropriate fire safety measures are in place to minimise the risk of injury or loss of life in the event of a fire.

To help prevent fire in the workplace, your risk assessment should identify what could cause a fire to start, ie sources of ignition (heat or sparks) and substances that burn, and the people who may be at risk.

Once you have identified the risks, you can take appropriate action to control them. Consider whether you can avoid them altogether or, if this is not possible, how you can reduce the risks and manage them. Also consider how you will protect people if there is a fire.
Carry out a fire safety risk assessment
Keep sources of ignition and flammable substances apart
Avoid accidental fires, eg make sure heaters cannot be knocked over
Ensure good housekeeping at all times, eg avoid build-up of rubbish that could burn
Consider how to detect fires and how to warn people quickly if they start, eg installing smoke alarms and fire alarms or bells
Have the correct fire-fighting equipment for putting a fire out quickly
Keep fire exits and escape routes clearly marked and unobstructed at all times
Ensure your workers receive appropriate training on procedures they need to follow, including fire drills
Review and update your risk assessment regularly